Installation of an Oil Catch Can Hot-rod cars require extra components for extra
safety and performance. If you have a car modified for speed,it needs an oil
catch can installed Autel
MD701. This can is designed to filter out the oil vapors from the
crankcase,keeping your fuel's octane rating high and reducing any detonation
risk. The exact installation varies depending on a number of factors,especially
whether or not you installed a PCV system in your engine. Things You'll Need
Steel wool Oil catch can Wrench Screwdriver Vacuum lines Instructions 1. Fill
the can with a small portion of steel wool if you're using a can that isn't
internally baffled. The wool will function as a filter for the oil vapors as
they pass through the can. 2. Depressurize the car's fuel system. In most
cases,remove the fuel pump relay from the fuse box then run the engine until it
stalls. 3. Choose a location in the engine compartment to mount the oil catch
can. This depends greatly on the type and orientation of your engine,but there
may be a good location on the frame rail. 4. Fasten the oil catch can to your
mounting location within the engine compartment using the can's included bracket
and its screws/bolts. 5. Disconnect the oil return line connecting the intake
manifold to the PVC valve using a wrench on its fittings. 6. Connect the oil
catch can to the PVC valve using a new vacuum line autel
ms908. Connect the can to the intake manifold with another vacuum line. 7.
Tie the new vacuum lines down using zip ties,making sure you don't tie them to
any components that move or get excessively hot.
Related Links
http://autosuma.npage.de/how-to-get-a-copy-of-the-window-sticker-for-an-audi.html